dmesg output

[Rodney Hills]

Looks like the system is having trouble initiating any I/O onthe SCSI controller. Could be a hardware problem on one of the scsi devices or the scsi controller itself.

Also, make sure all the connections are good and that the terminator is also connected.

Hope this helps...

-- Rod Hills

[Paula J Frazer-Campbell]

Hi

Scsi controller - on bus 4 and 5
Do and ioscan -fnc bc

to see hardware addresses.

Paula

[S.K. Chan]

Check (docid=KBRC00001951). It'll give you some idea what it meant. To me it looks like your scsi controller is failing.
http://support1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000059199380
Hope it helps ..

[Sajid_1]

hello,

This can be:
a patch issue
a SCSI error. Check the devices with stm tools:
# stm

[MANOJ SRIVASTAVA]

Do u ahve a Jamica Boxconencted tot he amchine , it looks etiher there ia power porblem or on of the disk in the enclosure is not good.


Manoj Srivastava