driver patch

[Nabil Boussetta]

i have a rp7410 machine connected via san switchs to an MSL library.
i'd like to install latest patch driver of all devices in the san path

i have done an ioscan -funH 1/0/2/0/0 (HW patch of the HB card)

i guess that i should patch the following drivers : ( stape, td , fcp, fcparray, fcpdev, schgr )

i have done a search for patches . i have found the following : (PHKL_33425,PHKL31326, PHKL33066)

did you recommend me to install them ? is there another patches that i should apply



this the output of the ioscan command

Class I H/W Path Driver S/W State H/W Type Description
==========================================================================
fc 0 1/0/2/0/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channel
/dev/td0

fcp 0 1/0/2/0/0.1 fcp CLAIMED INTERFACE FCP Domain

ext_bus 4 1/0/2/0/0.1.0.0.0 fcparray CLAIMED INTERFACE FCP Array Interface

target 9 1/0/2/0/0.1.0.0.0.0 tgt CLAIMED DEVICE

ctl 4 1/0/2/0/0.1.0.0.0.0.0 sctl CLAIMED DEVICE HP HSV100
/dev/rscsi/c4t0d0

hsx 0 1/0/2/0/0.1.0.0.0.0.1 hsx CLAIMED DEVICE HP HSV100

hsx 4 1/0/2/0/0.1.0.0.0.0.2 hsx CLAIMED DEVICE HP HSV100

hsx 5 1/0/2/0/0.1.0.0.0.0.3 hsx CLAIMED DEVICE HP HSV100

hsx 13 1/0/2/0/0.1.0.0.0.0.4 hsx CLAIMED DEVICE HP HSV100

hsx 17 1/0/2/0/0.1.0.0.0.0.5 hsx CLAIMED DEVICE HP HSV100

hsx 19 1/0/2/0/0.1.0.0.0.0.6 hsx CLAIMED DEVICE HP HSV100

target 20 1/0/2/0/0.1.0.0.0.1 tgt CLAIMED DEVICE

hsx 25 1/0/2/0/0.1.0.0.0.1.0 hsx CLAIMED DEVICE HP HSV100

ext_bus 6 1/0/2/0/0.1.0.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface

target 10 1/0/2/0/0.1.0.255.0.0 tgt CLAIMED DEVICE

ctl 37 1/0/2/0/0.1.0.255.0.0.0 sctl CLAIMED DEVICE HP HSV100
/dev/rscsi/c6t0d0

ext_bus 9 1/0/2/0/0.1.1.0.0 fcparray CLAIMED INTERFACE FCP Array Interface

target 11 1/0/2/0/0.1.1.0.0.0 tgt CLAIMED DEVICE

ctl 39 1/0/2/0/0.1.1.0.0.0.0 sctl CLAIMED DEVICE HP HSV100
/dev/rscsi/c9t0d0

hsx 2 1/0/2/0/0.1.1.0.0.0.1 hsx CLAIMED DEVICE HP HSV100

hsx 6 1/0/2/0/0.1.1.0.0.0.2 hsx CLAIMED DEVICE HP HSV100

hsx 7 1/0/2/0/0.1.1.0.0.0.3 hsx CLAIMED DEVICE HP HSV100

hsx 15 1/0/2/0/0.1.1.0.0.0.4 hsx CLAIMED DEVICE HP HSV100

hsx 21 1/0/2/0/0.1.1.0.0.0.5 hsx CLAIMED DEVICE HP HSV100

hsx 23 1/0/2/0/0.1.1.0.0.0.6 hsx CLAIMED DEVICE HP HSV100

target 22 1/0/2/0/0.1.1.0.0.1 tgt CLAIMED DEVICE

hsx 27 1/0/2/0/0.1.1.0.0.1.0 hsx CLAIMED DEVICE HP HSV100

ext_bus 11 1/0/2/0/0.1.1.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface

target 12 1/0/2/0/0.1.1.255.0.0 tgt CLAIMED DEVICE

ctl 71 1/0/2/0/0.1.1.255.0.0.0 sctl CLAIMED DEVICE HP HSV100
/dev/rscsi/c11t0d0

ext_bus 15 1/0/2/0/0.1.7.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface

target 13 1/0/2/0/0.1.7.255.0.0 tgt CLAIMED DEVICE

autoch 0 1/0/2/0/0.1.7.255.0.0.0 schgr CLAIMED DEVICE COMPAQ MSL5000 Series
/dev/rac/c15t0d0

tape 7 1/0/2/0/0.1.7.255.0.0.1 stape CLAIMED DEVICE HP Ultrium 1-SCSI
/dev/rmt/7m /dev/rmt/7mnb /dev/rmt/c15t0d1BESTn
/dev/rmt/7mb /dev/rmt/c15t0d1BEST /dev/rmt/c15t0d1BESTnb
/dev/rmt/7mn /dev/rmt/c15t0d1BESTb

tape 8 1/0/2/0/0.1.7.255.0.0.2 stape CLAIMED DEVICE HP Ultrium 1-SCSI
/dev/rmt/8m /dev/rmt/8mnb /dev/rmt/c15t0d2BESTn
/dev/rmt/8mb /dev/rmt/c15t0d2BEST /dev/rmt/c15t0d2BESTnb
/dev/rmt/8mn /dev/rmt/c15t0d2BESTb

[Zeev Schultz]

Updated versions of patches are usually most wellcomed,just check that they don't have warnings specific to your environment.

See also Enterprise Backup Matrix for supported versions,HBAs,backup products etc :
ftp://ftp.compaq.com/pub/products/storageworks/techdoc/ebs/EBSMatrix-1005.pdf

[Steven E. Protter]

Shalom Nabil,

I recommend installing if there are no warnings.

Did you have an earlier thread? What is the error message?

I don't think you'll be able to boot Ignite off this thing, its probably not supported, but you should be able to produce tapes and read them.

SEP