HPE Community
Operating System - HP-UX
1832915 Members
3711 Online
110048 Solutions
New Discussion

Entria Xterm boot problem

 
Stuart Powell
Super Advisor

‎09-19-2003 07:58 AM

‎09-19-2003 07:58 AM

Entria Xterm boot problem

I am working on replacing an Xterminal boot server running HP-UX 10.20 with a server running 11.11. I have installed Enware B.07.11 and Netstation B.09.11 server software. I have been sucessful in booting an Envisix station, but not the Entria. The X term successfully get's it's IP from the 11.11 server and finds the config file, but says it cannot find the .ld file:
12/31-19:00> File Server: 147.116.65.29 using /nfs/
12/31-19:00> Found file: /opt/hpxt/enware/xthome/config/entriapls.cfg
12/31-19:00> 497 Symbols loaded
09/18-15:25> Not found: /opt/hpxt/enware/xthome/bin/xc1slt16.modules.ld
09/18-15:25> Not found: /opt/hpxt/enware/xthome/bin/147.116.65.65.modules.ld
09/18-15:25> Not found: /opt/hpxt/enware/xthome/bin/modules.ld
I compared the directory structure between the two systems and they look good.
Any ideas?

Stuart
Sometimes the best answer is another question
0 Kudos
Reply
1 REPLY 1
Ken Hubnik_2
Honored Contributor

‎09-19-2003 08:05 AM

‎09-19-2003 08:05 AM

Re: Entria Xterm boot problem

Why is the IP address in the path different?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.