Error Details from Syslog entry

[Ashwin_4]

Hi Masters,

Please tell me more about the following errors:

Jan 27 11:36:46 west1tr vmunix: btlan init: WARNING - Unable to setup Read/Write Prefetch lengths
Jan 27 13:33:59 west1tr telnetd[4746]: Error checking child terminationstatus: error 4: Interrupted system call.

Thanks in advance.

[Ashwin_4]

Jan 27 11:36:46 west1tr vmunix: btlan init: WARNING - Unable to setup Read/Writ
e Prefetch lengths^M
Jan 27 11:36:46 west1tr vmunix: btlan3: Initializing 10/100BASE-TX card at 0/0/0
/0....^M
Jan 27 11:36:46 west1tr vmunix: ^M
Jan 27 11:36:46 west1tr vmunix: System Console is on the Built-In Serial Int
erface^M
Jan 27 11:36:46 west1tr vmunix: btlan5: Initializing 10/100BASE-TX card at 0/6/0
/0....^M
Jan 27 11:36:46 west1tr vmunix: btlan6: Initializing 10/100BASE-TX card at 0/7/0
/0....^M


Output of "lanscan"
lanscan
Hardware Station Crd Hdw Net-Interface NM MAC HP-DLPI DLPI
Path Address In# State NamePPA ID Type Support Mjr#
0/0/0/0 0x00306E0C5930 0 UP lan0 snap0 1 ETHER Yes 119
0/6/0/0 0x00306E0C2409 2 UP lan2 snap2 2 ETHER Yes 119
0/7/0/0 0x001083F783EB 1 UP lan1 snap1 3 ETHER Yes 119

doesnot show btlan3 btlan4 btlan 5

[Hoefnix]

When you do an ioscan:
ioscan -fnClan
Do you see the devices claimend:
lan 0 0/0/0/0 btlan3 CLAIMED INTERFACE HP PCI 10/100Base-T
X Core
/dev/diag/lan0 /dev/ether0

If not, did you install the driver software?

In the lanscan output you will see no btlan3..8 but only lan0..8

Regards,
Peter

[T G Manikandan]

What version of OS you are running,

Install the latest network patches.That should resolve the problem

[Fabio Ettore]

Hi,

as already said problem could be solved by installing the latest network patches.
Anyway what is the value of npty and nstrpty in kernel parameters?

Best regards,
Ettore

[Ashwin_4]

Hi Sorry for the delay.

OS Ver: HP-UX west1tr B.11.00 U 9000/800
Kernel Parameter:
npty 800
nstrpty 800

swlist output attached here.

[Ashwin_4]

Hi Masters,
Any advice here.

Thanks.

[massimo_38]

Hi Ashwin,

as T.G. said what's about the latest network patches? I saw your 'swlist -l product' output and.......your system has network patches superseded.
Then go into ITRC patch database and in search by keyword insert streams, ARPA transport, 100BT, LAN. These keywords must be inserted one by one.
You will obtain latest and recommended network patches. Well....install them!
Of course I cannot be sure but I think that it will solve your problem.

Good luck!

Best regards,
Ettore

I hope this helps you.

[Fabio Ettore]

Hey Emanuele, scusa ma ti firmi Ettore? E' il tuo secondo nome?

[massimo_38]

Ciao a te!
Non so cosa stia succedendo!

Stamattina mi sono iscritto con un nuovo account itrc e no nvorrei che il sito avesse fatto qualche casino.

Io comunque sono Emanuele....non Ettore.

E non solo...quel messaggio scritto a nome mio e firmato a nome tuo, NON L'HO MAI SCRITTO!!!
Non so nemmeno di cosa stia parlando!

MI e' arrivata la notifica via mail...sono andato a guardare e ho scoperto sta cos strana!

Saluti!
EMANUELE