Errors on rx2620

[Svetoslav Gyurov]

I've got rx2620 with two processors and 8GB ram, HP-UX 11.23

Its was working perfect, there were no problems, except it was flashing yellow. When I read the MP logs I notice some errors and I can't figure out what caused them and I don't know even what does they mean. I searched about these errors and found only one post where the its said that the problem was in the system board. So I've got two questions: 1) Do you know what means these errors and 2) Is there some utility where I can paste encoded field and data field from the "Show logs" section from the MP so I could get more info about it. Thanks in advance.

Best regards,
sve

[Svetoslav Gyurov]

Sorry, forgot to say that Offline diagnostics show no errors and now I'm running stm excercise on all the hardware and it showed no problems for two hours.

[Torsten.]

Have a look at the troubleshooting section here:

http://docs.hp.com/en/AB331-90008/index.html

Normally, the logs are telling you what is wrong. This information is readable more or less. You can configure the view from hex to text. If you find error messages regarding the hardware and you are in doubt, call hp. But hardware errors will also be reported by online diagnostics. Check roots mail account and the logs (syslog etc).

[Svetoslav Gyurov]

I'm so sorry, I forgot to attach the errors file, excusse me.