HAS Connection

[Isaac_4]

Hi:

Some body know if the following configuration will be work fine:

We try to connect one HAS System Disk (A3311A)a DUAL FWD card (A5159B), with a Cable C2362B. We are not sure about the cable.

Please help me.

[Robert-Jan Goossens]

Hi Isaac,

C2362B
SCSI interface cable with thumbscrews on both ends 68 pin very high density (M) to 68 pin high density (M) - 128 Ohms - 2.5m (8.2ft) long

For a A3311A you will need to take a look at next link.

http://partsinfo.hp.com/cgi-bin/spi/main?sel_flg=partlist&model=A3311A&HP_model=A3311A&modname=HA+Disk+Enclosure+%28A3311A%29&template=secondary&plist_sval=Cable+%28Interface%29&plist_styp=subcat&dealer_id=&keysel=Cable+%28Interface%29&catsel=X&ptypsel=X&strsrch=&pictype=I&picture=X&uniqpic

Hope it helps,

Robert-Jan.

[Eugeny Brychkov]

The cable is ok. You can connect one HBA's channel to jamaica and daisy chain A and B busses, but you can connect bus A to one HBA's channel and bus B to another one. Do not forget to put C2905A HVD terminator at the end of SCSI Bus(ses)
Eugeny