hp problem

[rajkumar_2]

every time the hpux in our company automaticately go to level 1.afterthat system will down.i need reboot the system

[Shahul]

Hi

Can U explain ur question once again? And when server is going to level 1?

Shahul

[Michael Tully]

Your question is not quite clear, so I have answered what I think maybe your problem.

When you shutdown your server what options are you using?

To reboot your server you must use
# shutdown -r 0
or to shutdown completely
# shutdown -h 0

If you use shutdown with no options the system will place you in run level one or single-user mode. Also check to see that your /etc/inittab has the correct setting for the run-level.

HTH
Michael

[Sundar_7]

Hi,

I guess Ur system is getting into

Run level 1 when ever U are starting the

system ?

If I am correct then check ur inittab entry

initdefault:1:

vi /etc/inittab

the label will be initdefault..

Change the run level next to it to 3..

I beleive this might solve ur problem

Sundar

[Jack Werner]

Is something other than shutdown or startup is causing HP/UX to enter run level "1", you will have to do some major troubleshooting.