HP-UX Installation

[Asim_5]

Hi All,

I need to know about HP-UX version for Intel platform. if yes how to get that version.

Thanks

Asim

[Norman_21]

Hello,
As far as I know there isn't one for Intel Base PCs. However, you can still use LINIX or other Unix shells that will support Intel based. Even better to buy a workstation from Ebay loaded with HP-UX 10.20 or later!!
there are good deals on ebay!
good luck!

[Rajeev Shukla]

Hi Asim,
There is No HP software for pure Intel but however there is HPUX for Intel Itanium baced machines and below is the link to give you more idea.
You can get in touch with the HP Techincal support manager if you have so or marketing team for the quote.
http://www.hp.com/products1/unix/operating/choice/hpux_itanium.html
Or if you buy the Hardware you'll get with that.

[T G Manikandan]

HPUX does not support installation on intel platform PC's.

Get solaris for that which should help you.

check downloads at www.sun.com

[Sunil Sharma_1]

Hi Asim,


Unlike Solaris HP Unix is not available on i386 platform.

Sunil

[G. Vrijhoeven]

Hi Asim,

I am going to tell you the same. No HPUX for intel, but you can get HPUX tools for linux like lvm and MC/SG. Check out:


http://software.hp.com/portal/swdepot/displayProductsList.do?category=HA

Gideon

[John Carr_2]

HPUX was designed RISC architecture and so does not support the intel chip set. I have not heard of any plans to do this. Solaris or Linux are your 2 main options :-) John.

[lee forrest_1]

http://techupdate.zdnet.com/techupdate/stories/main/0,14179,2822837,00.html