Ignite client version mismatch issue

[Ron Keiper]

I've tried to search for this and didn't get quite what I was looking for,
I just upgraded both server and client to the newset Ignite version.
When I go to 'boot client' it still complains about the version on the client not matching the server version, I've tried removing the client from the server, re-adding it, tried deleteing the clients recovery directory on the server, and I have verified with swlist -a revision, that all the file sets are the new version, on both machines.

Any ideas as to why I still get this error. ?
thanks
Ron

[Chan 007]

Can you check the parameter

/var/opt/ignite/INDEX

/var/opt/ignite/config.local

Client-specific configuration file

Chan

[Bharat Katkar]

Hi Ron,

I would recommend you to uninstall the existing IgniteUX from both client and server and then do fresh IgniteUX install.
Probably that should work.

Regards,

[Ron Keiper]

Thanks both of you, what I did before was upgraded the client, but saw some old file sets, so I did a swmodify -u on them, then re-installed the new version, however it looks like some stuff remained in /var/opt/ignite/ from before, I removed everything under there, did a re-install, and will try it now after making another net_recovery and see if it works this time.

I will post my reults. thanks

[Ron Keiper]

Ok, I totally removed both versions, and the directories and re-installed, now I cannot add the client because it is an 11.11 Risc machine. it says it failed to copy /opt/ignite/boot/Rel_B.11.11/INSTALLFS.
How can I get this support, or fileset added to my ignit server to support Risc machines ?

[Chan 007]

Ron,

Please see the link below.

http://www.docs.hp.com/en/5991-0733/5991-0733.pdf

Chan.

Ron,

If possible allot points