ignite error

[dongming]

Hello all:
i met problem when i add new server on ignite server. it display "could not determine if the IUX server supports archive for the hp-ux release of the system ,make_net_recovery may not work properly."
i check the old case, some one said it was tfptd issue, i check my server and client it is ok.

however it worked before, now i want to set up a dedicate backup network, and transfer all backup to use this backup network, for example. client aaa use 172 subnet before, i set up 192 subnet for backup network, and setup server aaa on 192 to aaam. and add aaam to ignite server , then meet this problem .

i don't think it relate this.
anyone has good idea?

[dongming]

do i need change hostname and system name by instl_adm ?

[Steven E. Protter]

Shalom dongming,

I possibily interpret that you have tried to set up the new network on the same network as the old one.

Primer
host1:
ip:192.168.0.1
netmask:255.255.255.0

network is 192.168.0 host portion of the address is 1.

Under HP-UX you can not have two NIC cards operating on the same network at the same time. Usually even trying this will crash networking. Please review and if need be correct your network configuration.


Suuplement(fishing expedition):
What is the OS of the new system?

Is there a Core-Os of the new systems Os swcopy'ed to the Ignite Server.

New system and old:
swverify \*

# make sure something has not gone corrupt on us.

swlist -l product | grep -i Ignite

bdf /var there is a space requirement.

SEP

[dongming]

Hi Sep,
thanks very much for your response.

that 's true, there are mutilple nic on ignite server, but not on same sunnet.
hostA, 172.168.1.1
192.168.1.1

what i want to do is, i set up dedicate network for backup on subnet 192.168.1.0
for all servers and let backup traffic on this subnet.
i don't know how to configure this on ignite server, so i aliase ip, such as hostAm 192.168.1.1 , and same for other servers. and then add this name to ignite server, then the problem happened.

is there other way that don't need aliase,and i configure directly ?
thanks