Ignite-UX Installation Question

[Antonio_13]

Hello,
is it possible to install for example a 11.11 HPUX version from an Ignite-UX 11.0 server?
I'mean I have a server with 11.00 and want to install machines with 11.11.

thank you in advance

[Patrick Wallek · Accepted solution]

Yes, that is possible.

You've just got to make sure you install the correct version of the Ignite/UX software on the machine that is going to be your Ignite server. You will want to download and install the "all hp-ux 10.20/11.0/11i system" version.

http://software.hp.com/products/IUX/download.html#down11

[S.K. Chan]

Yes, no problem at all. For more info on the configuration check this doc ..
http://www.docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/B2355-90750/B2355-90750_top.html&con=/hpux/onlinedocs/B2355-90750/00/00/9-con.html&toc=/hpux/onlinedocs/B2355-90750/00/00/9-toc.html&searchterms=ignite&queryid=20030214-093410

[monasingh_1]

Just a note: I would just install a clean 11.11 on a system and use that as ignite server and any depot for further installation or upgrade. I know the layout verison of all commands is same for 11 and 11i, but If possible I would go with 11.11 for ignite server(my preference).

[monasingh_1]

Just a note: I would just install a clean 11.11 on a system and use that as ignite server and any depot for further installation or upgrade. I know the layout verison of all sw commands is same for 11 and 11i, but If possible I would go with 11.11 for ignite server(my preference).