Operating System - HP-UX
1833828 Members
1984 Online
110063 Solutions
New Discussion

Re: kernel params for cpu upgrade

 
SOLVED
Go to solution
Victor_5
Trusted Contributor

kernel params for cpu upgrade

I upgraded my N Class from 2 cpu to 4 cpu, which kernel param I need to adjust after that? I am looking for general params. Thanks.
4 REPLIES 4
Sridhar Bhaskarla
Honored Contributor
Solution

Re: kernel params for cpu upgrade

Victor,

I did upgrade my systems may times but I never thought of tweaking kernel parameters. In my view, you don't need to worry about it.

-Sri

You may be disappointed if you fail, but you are doomed if you don't try
Sandip Ghosh
Honored Contributor

Re: kernel params for cpu upgrade

I don't think that you need any kernel parameter change after CPU upgrade. If your application is multi-threaded it will take up automatically. Look at glance/top whether the system is using all of the CPU or not.

Sandip
Good Luck!!!
Helen French
Honored Contributor

Re: kernel params for cpu upgrade

Hi Victor:

There is no need to tune the kernel parameters after upgrading the CPUs. If you increase memory or swap then you may need to. After upgrade you can observe the performance and find out if anything wrong in resource usage. You can plan the kernel tuning accordingly.

HTH,
Shiju
Life is a promise, fulfill it!
Patrick Wallek
Honored Contributor

Re: kernel params for cpu upgrade

As far as I know there are no kernel parameters that need to be updated why you add CPUs.

As long as the system sees the CPUs when you boot the machine, you will be OK.