LAN device identification & specs

[EDMS SST]

Hi,
I've got a K260 running 10.20 that is in another state (can't physically get to the box), I'd like to know how to find the model number of the 'built-in LAN' that is being used on the system. The reason is to get the specs on the function of the device, specifically how to find out if it's running half or full duplex (lanadmin, lanscan and SAM don't show that). I know it's 10MB/s, would like to find out if I can change the duplex to full if it is half now.
Thanks

[James R. Ferguson]

Hi:

# ioscan -fnkC lan

# lanscan -iv #...use nmid or ppa in 'lanadmin'

# lanadmin -x |

,,,JRF...

[A. Clay Stephenson · Accepted solution]

Hi,

Sorry James, the -x option is not supported on the built-in LAN on the K-box. There is no provision for setting or getting the Duplex mode in 10.20 or 11i.

Regards, Clay

[James R. Ferguson]

Hi again!

Oops, Clay is correct, of course. I missed the key indicator "built-in". Sorry!

...JRF...

[EDMS SST]

Thanks to both, I tried that stuff, was hoping for something I
was missing.