LanSafe software

[Patrick Wallek]

Good day all,

I have a customer that is running the old LanSafe software to communicate with an HP R3000 UPS.  This is on an HP-UX 11.11 system.

In trying to troubleshoot an issue I have been looking occasionally at the files in the /opt/LanSafe/Log/PGraph directory.  These file appear to data from the UPS, but I have not been able to find any information on what the various fields are, other than the obvious.

Here is an example:

"07/10/2018 19:02:37","1531263757", "Log started"
"07/10/2018 19:04:56","1531263896", "Power failure"
"07/10/2018 19:04:56","1531263896","0.00","60.02","212.05","370","126.11","NoData","NoData","NoData","NoData","NoData","NoData"
"07/10/2018 19:05:56","1531263956", "Shutting down"
"07/10/2018 19:13:23","1531264403", "Log started"

*****

"07/12/2018 00:00:00","1531368000","204.14","60.02","203.78","360","138.23","NoData","NoData","NoData","NoData","NoData","NoData"
"07/12/2018 00:30:00","1531369800","204.83","60.02","204.88","360","138.23","NoData","NoData","NoData","NoData","NoData","NoData"
"07/12/2018 01:00:00","1531371600","205.08","59.84","204.94","360","137.98","NoData","NoData","NoData","NoData","NoData","NoData"

First field is date/time, 2nd is epoch date, 3rd is input voltage (since it drops to 0 after the power outage above).  The rest I am not sure about.

I am especially interested to know if there is a field showing the current load and how much time on battery if power is lost.

Does anyone have any old documentation explaining these?  I've found nothing.

Thanks!