libiconv.sl liblber.sl.2 missing

[Jerry Weiss]

I'm trying to get samba 3.0.14a running (need ADS support/authentication) on HPUX 11.0. Seems I'm missing 2 libraries, liblber.sl.2 and libiconv.sl are not to be found!

Does anyone know where I can get these two?

I saw an older post similar requesting libiconv.sl but the link provided is now dead.

Thanks in advance!

[Mugilvannan]

You can download it from http://hpux.connect.org.uk/ftp/hpux/Networking/ Misc/samba-3.0.14/samba-3.0.14-hppa-11.11.depot.gz

[Adisuria Wangsadinata_1]

Hi,

Is this the one that you looking for :

http://hpux.cs.utah.edu/hppd/hpux/Development/Libraries/libiconv-1.10/

Hope this information can help you.

Cheers,
AW

[Adisuria Wangsadinata_1]

Hi,

Check the thread below also :

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=764881

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=805246

Hope this information can help you.

Cheers,
AW

[Arunvijai_4]

You need Libiconv and OpenLDAP..

http://lists.samba.org/archive/samba/2005-June/106428.html

Libiconv from,
http://hpux.connect.org.uk/hppd/hpux/Development/Libraries/libiconv-1.10/

OpenLDAP from,
http://h20293.www2.hp.com/portal/swdepot/try.do?productNumber=HPUXIEXP1111

-Arun

[Jerry Weiss]

Well everyone has provided some good info but the point is that I've got HPUX 11.0, NOT 11iv1/v2, so if I install an 11i version will it behave properly?