1830938 Members
2147 Online
110017 Solutions
New Discussion

Maximum tape usage

 
SOLVED
Go to solution
Ed Hon
Regular Advisor

Maximum tape usage

My fbackup failed because the config parameter maxvoluses default value of 100 was exceeded. What is the maximum recommended tape usage for DLT-IV and 4mm DDS-2 tapes? Thanks.
2 REPLIES 2
Sanjay_6
Honored Contributor

Re: Maximum tape usage

Hi Ed,

The value depends on the "maxvoluses" parameter in the fbackup config file which is by default set to "100".

Take a look at this link from itrc,

http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000076534388

The itrc doc id is KBRC00003076.

I would think that leaving the value at 100 would be better.

Hope this helps.

Regds
Robert-Jan Goossens
Honored Contributor
Solution

Re: Maximum tape usage

Hi Ed,

For DLT

What is the estimated lifespan and shelf-life of my DLT and SDLT tapes?

The life expectancy of DLT and SDLT cartridges is 5000 load and unload cycles or 1,000,000 passes over the head. Cartridge shelf life is more than 30 years with less than 10% loss in demagnetization at 20 degrees C and 40% noncondensing humidity.

http://selfservice.talisma.com/display/2/index.asp?c=18&cpc=TJVN0Y442nJq41250384h8TsoO3RuDHpbReVI&cid=11&cat=&catURL=&r=0.2696955

Best regards,
Robert-Jan