HPE Community
Operating System - HP-UX
1758795 Members
2529 Online
108875 Solutions
New Discussion юеВ

memory part number

 
SOLVED
Go to solution
Coolmar
Esteemed Contributor

тАО07-21-2006 02:19 AM

тАО07-21-2006 02:19 AM

memory part number

Is there a way to find out the part number or model number (the A123456 number) of the memory installed in a system from the command line (like rather than taking the system apart)?

Thanks,
SD
0 Kudos
Reply
2 REPLIES 2
Pete Randall
Outstanding Contributor

тАО07-21-2006 02:32 AM

тАО07-21-2006 02:32 AM

Solution

Re: memory part number

Perhaps the Support Tools Manager (xstm, cstm, etc) can help you. At the very least you should be able to find out the size of the SIMMS/DIMMS which you can check against partsurfer and come up with the number that way:

http://partsurfer.hp.com/cgi-bin/spi/main


Pete

Pete
Reply
Torsten.
Acclaimed Contributor

тАО07-21-2006 03:50 AM

тАО07-21-2006 03:50 AM

Re: memory part number

Depending on your system you will get this information from diagnostics or the MPs FRU information.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.