modem install

[Jeff Hagstrom]

When I install a modem to an HPK460/9000, hp-ux 11.00 thru SAM, will it ask to reboot the box?

[A. Clay Stephenson · Accepted solution]

No --- but, there's always a but -- if the modem is attached to a MUX for which there is no driver yet configured in the kernel, then a kernel build would be necessary. If you, for example, are connecting the modem to an MDP then the driver should already be present.

[Jeff Hagstrom]

I am connecting to MDP RS-232 panel where there is already a modem connected to it. This would make 3 total modems. The internal one, the existing one on the MDP panel and this new modem.

[A. Clay Stephenson]

Then the answer is no; just hook the puppy up.