HPE Community
Operating System - HP-UX
1863005 Members
1565 Online
110446 Solutions
New Discussion

Re: Monitoring FS using CA spectrum.

 
rajasekar.m
Advisor

‎09-10-2009 04:50 AM

‎09-10-2009 04:50 AM

Monitoring FS using CA spectrum.

Hi All,

Please help.

there is no option on the SPECTRUM side to fix this. The issue is the device does not support the required mib objects for the functionality. The only two options that I can see are the following:

1. Contact the vendor to see if there is a configuration change that can be made on the device to support the required mib objects
2. Install an snmp agent that does support the required mib objects

The mib objects in question are the hrStorageTable for File System Monitoring and the hrSWRunTable for Process Monitoring. Both of these tables are part of the Host Resources (rfc2790) mib.

how to configure file system and process monitoring in hp-ux servers using CA spetrum.
0 Kudos
Reply
1 REPLY 1
Bill Hassell
Honored Contributor

‎09-10-2009 05:51 PM

‎09-10-2009 05:51 PM

Re: Monitoring FS using CA spectrum.

CA support is your best option for this question.


Bill Hassell, sysadmin
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.