Networking

[Dirk De Meyer_2]

Hi,

I've installed a 100 Base network card (procduct = J3515AR) in a Dclass Server. Can someone tell me wich drivers/patches I've to install so the system will recognize the network card.

Afterwards is it possible to configure the card with sam ?

[James R. Ferguson]

Hi:

See here:

http://techsolutions.hp.com/fe/configs.html#config_files

Regards!

...JRF...

[Duncan Edmonstone]

This link should help:

http://techsolutions.hp.com/fe/configs.html#config_files

HTH

Duncan

[Tim D Fulford]

The above will probably do the trick. I usually do ioscan -funClan & see what the descripton is. The pull out CD 1 of the Applications disks & do
# swlist -s /cdrom
& check out the nearest description.

Just the way I work, product numbers confuse me...@@@@@???

Tim

[Shahul]

Hi

First U will have to confirm that the H/W U have installed is compatible with server by looking the compatibility chart.

Secondly, U will have to install the appropriate driver for the NIC. This can be confirmed with this command
#ioscan -fn

The S/W state should be CLAIMED.

Then, Please install the patch for the 100 base T networking from application CD. Otherwise U will have problem while accessing the network.

Best of luck
Shahul

[sven verhaegen]

Hi J3515a lancards are using the software named J3623BA , it can be found on you application CD set , as this is a add-on card it requires you to have a password to activate it, further I would advise to install at least the latest :

arpa transport patch
lan cummulative patchg
100mb lancard specific patch

dependant on the OS you run (10.x , 11.x 11.i ... ) the patchnumbers might change so I couldn't put the number in here , if needed just consult the ITRC patch section , make sure to get all the dependant patches

[Sanjay_6]

Hi,

The driver for this lan card should be there on the 1st cd of the application cd set. The driver would be something like A3515 / B3515 / J3515 or something. Once you have installed the driver from the CD, you can configrue the printer through "SAM" if you want.

Hope this helps.

Regds