No system console

[rana786]

Hi all,

I am getting no system console of 2xrp4440 (HP-UX 11.11) servers. I can only use mp console but can not even move to the system console locally (using mp console) or remotely (using lan). All system LEDs are green but Hard disk led not blinking at all. What is the reasons of this situation?
System was fine a few hours before.

Rgds,
Rana

[Warren_9]

hi,

check the log of the MP, such as the console log and event log...

if the system is dead, you can use the MP to TC the server.

GOOD LUCK!!

[Senthil Kumar .A_1]

Hi Rana,

Is the cde running on your system.

Regards,
Senthil Kumar .A

[rana786]

Hi,
I can not even access using X-manager. The system status in the MP is "System is running fine. There is no log in the MP.
Please help.
Rgds,
Rana

[Senthil Kumar .A_1]

Hi,

Are you able to telnet the server atleast.

Regards,
Senthil Kumar .A

[Khairy]

From the MP console, try type CO and ctrl-E cf.

If still nothing display, then most probably you need to navigate through the error logs to find errors. You could do this by entering SL (event logs) and CL for console logs. You might find something there. If still can't access the system, then you have no choice but to perform the TC command. Monitor closely during the system rebooted from the console. If the system rebooted successfully, you should be able see something from the console.

If the system is OK (you can telnet/ssh) but you still can't access the console, reset the MP. Be sure to shutdown you system before you do this. Type XD -reset. Hope it works.

Good luck