parstatus problems

[Jeff.Z]

Got chassis & cell information unavailable when doing parstatus. GSP was reseted and patch PHKL_30524 was applied also. Any suggestions on this? Thanks, Jeff.


=>swlist -l product|grep PHKL_30524
PHKL_30524 1.0 par fans,cabtype,sinc,hwpath,cell info,vPar

=>parstatus
Warning: No action specified. Default behaviour is display all.
[Complex]
Complex Name : Complex1
Complex Capacity
Compute Cabinet (8 cell capable) : 1
Active GSP Location : cabinet 0
Model : 9000/800/SD32B
Serial Number : USE4726MLJ
Current Product Number : A9834A
Original Product Number : A9834A
Complex Profile Revision : 1.0
The total number of Partitions Present : 1

[Cabinet]
Cabinet I/O Bulk Power Backplane
Blowers Fans Supplies Power Boards
OK/ OK/ OK/ OK/
Cab Failed/ Failed/ Failed/ Failed/
Num Cabinet Type N Status N Status N Status N Status GSP
=== ============ ========= ========= ========== ============ ======
0 SD32B 4/ 0/ N+ 5/ 0/ ? 6/ 0/ N+ 2/ 0/ N active

Notes: N+ = There are one or more spare items (fans/power supplies).
N = The number of items meets but does not exceed the need.
N- = There are insufficient items to meet the need.
? = The adequacy of the cooling system/power supplies is unknown.

[Cell]
CPU Memory Use
OK/ (GB) Core On
Hardware Actual Deconf/ OK/ Cell Next Par
Location Usage Max Deconf Connected To Capable Boot Num
========== ============ ======= ========= =================== ======= ==== ===
? Error: Cell detail information unavailable. (5) (-9)
? Error: Cell detail information unavailable. (5) (-9)
? Error: Cell detail information unavailable. (5) (-9)
? Error: Cell detail information unavailable. (5) (-9)
cab0,cell4 absent - - - - - -
? Error: Cell detail information unavailable. (5) (-9)
cab0,cell6 absent - - - - - -
? Error: Cell detail information unavailable. (5) (-9)

[Chassis]
Core Connected Par
Hardware Location Usage IO To Num
=================== ============ ==== ========== ===
cab0,bay0,chassis0 Error: Chassis detail information unavailable. (5) (-9)
cab0,bay0,chassis1 Error: Chassis detail information unavailable. (5) (-9)
cab0,bay0,chassis2 Error: Chassis detail information unavailable. (5) (-9)
cab0,bay0,chassis3 Error: Chassis detail information unavailable. (5) (-9)
cab0,bay1,chassis0 absent - - -
cab0,bay1,chassis1 Error: Chassis detail information unavailable. (5) (-9)
cab0,bay1,chassis2 absent - - -
cab0,bay1,chassis3 Error: Chassis detail information unavailable. (5) (-9)

[Partition]
Par # of # of I/O
Num Status Cells Chassis Core cell Partition Name (first 30 chars)
=== ============ ===== ======== ========== ===============================
0 inactive 6 0 ? Vision21_Usage1 and Usage2
[newhp212<>/]
=>

[John Guster]

you have onlu one partion configured and it is down, not up. last line you posted is indicating partition 0 in inactive state.

[Jeff.Z]

John, thanks for your reply. Actually, partition 0 is up & running. On the OS level, everything looks good except 'parstatus'.

[Jeff.Z]

partition 0 is the only partition on this SD32B and it's impossible in 'down' state when O/S is up & running. my problem is the parstatus doesn't work and give some errors even though the O/s looks fine. Any suggestions, appreciate.

[skt_skt]

This patch should not casue the error.

Did u install the dependant PHKL_30523 along with PHKL_30524?

which h/w plaform it is?"model"