PC Emulation Software for PC's

[Bob Yeska_2]

I'm looking for "best" PC emulation software for an HP K580. I've used Procomm
and it works well but I understand that there is Freeware available like
NetTerm that works just as well. I could also use a PC LPR software that can be
used to print to printers attached to a Lantronix or HP print servers. Just
point me to the Web sites.

[Brantley Hudson_1]

I'm currently using Tera Term which is freeware. The Tera Term homepage is
http://www.vector.co.jp/authors/VA002416/teraterm.html

Hope this helps,
Brantley

[Bob Yeska_2]

I also found Net Term at www.neosoft.com which I found a number of HP-UX shops
use.It also has an FTP Daemon with it which can be useful. I've always been
partial to ProComm from the darkest of the DOS days but it costs money.I've
also used OnNet from FTP which has a full function TCP/IP stack and does
3270/5250/VT's/HP's/etc. but it costs a pile of money per seat.

[Victor Berridge_1]

Hi,
Have you tried reflection for hp suite or tcp suite, or reflectionX from WRQ,
its not cheap but Im very happy with them.
You can download a full evaluation (60 days)at www.wrq.com
I also use ftp software, percomm, attachmate...but I like easy install...

Regards
Victor

[Bob Yeska_2]

That new Reflectionx is supposed to be Web/browser based. It looked really cool
but I haven't used it. The old Reflections was #1 in an AS400 based system. I
have one application that the software vendor will only support ProComm and the
others don't care. Management wants the cheapest (aka free) solution for the
other applications.