Printer control codes

[Mitch Nguyen_1]

How do I insert printer control codes for an Epson printer? I want to set the
page size. This is for HPUX 11.0.

[Dan Hull]

Assuming you are talking about doing it for all print jobs, and not just ones
from a certain application, you would need to modify the printer's model
script. Note that this is neither supported nor recommended by HP, but it has
been done successfully in the past.

The model script for a printer that is already set up resides in
/var/spool/lp/interface (unless it's set up with JetDirect).