Printer issue

[brian_31]

This printer has the foll issue. printer name DMQ1 (defined in /etc/hosts)(note: this ip was newly changed).

root@ah20 # nslookup DMQ1
Using /etc/hosts on: ah20

looking up FILES
Name: DMQ1
Address: 66.84.128.101

root@ah20 # lpstat -pDMQ1
printer DMQ1 disabled since Aug 15 11:15 -
error 1 returned
fence priority : 0
root@ah20 # enable DMQ1
printer "DMQ1" now enabled
root@ah20 # accept DMQ1
accept: destination "DMQ1" was already accepting requests
root@ah20 # lpstat -pDMQ1
printer DMQ1 disabled since Aug 15 11:19 -
error 1 returned
fence priority : 0

Please help

Thanks

Brian

[IT_2007]

what OS version are you running?

Try to stop and start scheduler.
lpshut
lpsched

[Jonathan Fife]

Can you ping DMQ1?

[A. Clay Stephenson]

Probably the easist thing to do is do an lpshut, remove and reinstall the printer, and then lpsched.

[Rick Garland]

You can ensure that the IP was changed for the printer in the PATH of /etc/lp/interface/model.orig/

or as stated, the easiest is to remove and then readd the printer

[brian_31]

I am not ablt remove the printer using lpadmin -x as it states there are jobs queued.Also starnge is the fact that lpstat -a says
root@ah20 # lpstat -a |grep -i DMQ1
DMQ1 accepting requests since Jul 11 15:25

Not sure what the issue is. How will remove it?

Thanks

Brian

[A. Clay Stephenson · Accepted solution]

Use the cancel command to get rid of the requests or the lpmove command to move them to another queue. Is this a "Network" (in HP-UX speak) or a "Remote" printer?

[brian_31]

Clay:

Used lpmove. and then hppi to delete the printer. and added again. Thanks

Thanks

brian