problem about ignite client

[sassou]

I download ignite-UX B.5.3.35
After installation the system requered patch PHCO_28414 I install it after that trying to install the client I have an error.
Here is the logfile.
help me
======= 05/07/04 11:27:53 EDT Started /opt/ignite/bin/make_tape_recovery.
(Fri May 07 11:27:53 EDT 2004)
@(#) Ignite-UX Revision B.5.3.35
@(#) net_recovery (opt) $Revision: 10.624 $


* User interface starting.
NOTE: '' is not an absolute path
NOTE: '' is not an absolute path
* User interface completed successfully.
NOTE: Detected entries in the defaults file at
/var/opt/ignite/recovery/client_mnt/0x00306E1B0F3E/recovery/defaults.

* Checking Versions of Recovery Tools
* Checking Versions of Ignite-UX filesets
ERROR: Fileset: "Ignite-UX.FILE-SRV-10-20" (rev=B.3.6.82) is a different
version than the rest of Ignite-UX (rev=B.5.3.35). You must
update all filesets of the product to the same version for
proper behavior.
ERROR: Fileset: "Ignite-UX.FILE-SRV-11-00" (rev=B.3.6.82) is a different
version than the rest of Ignite-UX (rev=B.5.3.35). You must
update all filesets of the product to the same version for
proper behavior.
ERROR: All filesets in the Ignite-UX product must be the same revision.
Please update any old Ignite-UX filesets.


======= 05/07/04 11:30:04 EDT make_tape_recovery completed unsuccessfully

[G. Vrijhoeven]

Hi,

You got this message becouse you have two different verions installed. Update all filesets to B.5.3.35 and ignite will work.

You can download it at:

http://www.software.hp.com/products/IUX/download.html

HTH,

Gideon

[T G Manikandan]

you have different versions of IGNITE-UX installed on the machine.

Remove all the versions of IGNITE.
Install the latest one from

http://software.hp.com/products/IUX/download.html

[sassou]

First I install the software as u sugest but
ERROR: Read from serial depot file failed. Bad address (14).
ERROR: Read from serial depot file failed. Bad address (14).
ERROR: The file "/opt/ignite/boot/WINSTALL" was not loaded because it
is missing from the source media.
ERROR: The file "/opt/ignite/boot/boot_lif" was not loaded because it
is missing from the source media.
ERROR: Internal error. The directory "/opt/ignite/data" is missing
from the source media. It was not loaded. This error
occurred in function "idam_FinishTapeItem", source file
"id_ser.c", line 4703. Please give this information to your
Hewlett-Packard support contact.
ERROR: The file "/opt/ignite/data/INSTCMDS" was not loaded because it
is missing from the source media.
ERROR: The file "/opt/ignite/data/RECCMDS" was not loaded because it
is missing from the source media.
ERROR: Internal error. The directory "/sbin" is missing from the
source media. It was not loaded. This error occurred in
function "idam_FinishTapeItem", source file "id_ser.c", line
4703. Please give this information to your Hewlett-Packard
support contact.
ERROR: Internal error. The directory "/sbin/ch_hostname.d" is
missing from the source media. It was not loaded. This error
occurred in function "idam_FinishTapeItem", source file
"id_ser.c", line 4703. Please give this information to your
Hewlett-Packard support contact.
ERROR: Failed installing fileset
"Ignite-UX.BOOT-KERNEL-PA,r=B.5.3.35". Check the above output
for details.
* Retry number 1 of 1 for loading files for fileset
"Ignite-UX.BOOT-KERNEL-PA,r=B.5.3.35".
* Installing fileset "Ignite-UX.BOOT-KERNEL-PA,r=B.5.3.35" (1 of
8).
ERROR: Read from serial depot file failed. No such file or directory
(2).
ERROR: Read from serial depot file failed. No such file or directory
(2).
ERROR: The file "/opt/ignite/boot/WINSTALL" was not loaded because it
is missing from the source media.
ERROR: The file "/opt/ignite/boot/boot_lif" was not loaded because it
is missing from the source media.
ERROR: Internal error. The directory "/opt/ignite/data" is missing
from the source media. It was not loaded. This error
occurred in function "idam_FinishTapeItem", source file
"id_ser.c", line 4703. Please give this information to your
Hewlett-Packard support contact.
ERROR: The file "/opt/ignite/data/INSTCMDS" was not loaded because it
is missing from the source media.
ERROR: The file "/opt/ignite/data/RECCMDS" was not loaded because it
is missing from the source media.
ERROR: Internal error. The directory "/sbin" is missing from the
source media. It was not loaded. This error occurred in
function "idam_FinishTapeItem", source file "id_ser.c", line
4703. Please give this information to your Hewlett-Packard
support contact.
ERROR: Internal error. The directory "/sbin/ch_hostname.d" is
missing from the source media. It was not loaded. This error
occurred in function "idam_FinishTapeItem", source file
"id_ser.c", line 4703. Please give this information to your
Hewlett-Packard support contact.
ERROR: Failed installing fileset
"Ignite-UX.BOOT-KERNEL-PA,r=B.5.3.35". Check the above output
for details.
NOTE: The Install Phase has suspended. Check the above output for
reasons.

On another server I install the sofware as you suggest
but another problem
It propose me to boot a new client when i boot on the client it can't restart it block in boot sequence
here is the logfile:
Starting the STREAMS daemons-phase 2
$Revision: vmunix: vw: -proj selectors: CUPI80_BL2000_1108 -c 'V
w for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108' Wed
Nov 8 19:24:56 PST 2000 $
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 2097152 Kbytes, lockable: 1555320 Kbytes, available: 1801592 Kbyte
s

======= 05/07/04 20:26:14 EDT HP-UX Installation Initialization. (Fri May 07
20:26:14 EDT 2004)
@(#) Ignite-UX Revision B.5.3.35
@(#) install/init (opt) $Revision: 10.281 $
* Scanning system for IO devices...
* Querying disk device: 0/0/1/1.2.0 ...
* Querying disk device: 0/0/2/0.2.0 ...
* Querying disk device: 0/4/0/0.1.0 ...
* Querying disk device: 0/7/0/0.0.0 ...
NOTE: Default (boot) source does not appear to be a valid (or complete)
install source, switching source to Network
ERROR: The install server's IP address is not set. See instl_adm(1M) on how
to set the default on the server.
Failed to startup networking, user interaction required

[sassou]

Trying to install the sofware :Ignite-UX-11-11_B.5.3.35_HP-UX_B.11.00_32+64.depot.
The anlyse step is correct but installation guive an error.
see attach file.