Problem in user login

[Megha Raju Adhikari]

Hi,

while trying to login to my RX2620 with 11.23 even if it is "root" it is showing that it is invalid user. i am not able to log in with any of the users in the machine. pls help to sort the problem.

Thanks
Raju

[Arunvijai_4]

Hi Raju,

Are you using telnet or ssh to login to your server ? Boot into single user mode and reset root's password.

ISL>hpux -is

to enter single user mode.

-Arun

[Megha Raju Adhikari]

Hi Arun,

i am using Hyper terminal. can u let me know how to go in to single user mode in itanium server. is there any same type of threads in this fourms?


thanks
Raju

[sdip]

Hi Raju,

Reboot the server & go to single user mode. Then look for any -t file created under /tcb/files/auth/r dir. Like root-t which might caused this kind of scenario. Also check dir permission of /etc /usr /sbin ...

Dip

[Arunvijai_4]

Hi Raju,

Check these threads,

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=60897
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=609097&admit=-682735245+1141969583129+28353475

-Arun

[Senthil Kumar .A_1]

Hi Raju,

Though you have mentioned ,u are using hyper terminal, you haven't specified whether your workstaion is connected to the console or MP serial port of your machine.

Best is to take a Laptop and hook on to the cosole port of the server Unless otherwise, you have MP lan configured.

See the following PPT to get a better Idea as to connecting to the console.

http://www.parsec.com/public/itaniumconsole.ppt

Since RX2620 uses a W-cable you can also refer the following link... check the detailed post I have given to connect to console.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1005112



Regards,
Senthil Kumar .A

[Shahul]

Hi,

In addition to above views, I would suggest you look at your passwd file if you have any open session.

Or try booting to single user mode. You may have lost your passwd file for some reason.

Best of luck
Shahul