Problem installing Ignite Client

[Eli Daniel]

hi,
i have the problem add to new client in the server ignite. the next message show in the windows:

Note: version is
server ignite HP-UX 11.23: Ignite-UX C.7.8.201 HP-UX System Installation Services

Client Ignite HP-UX 11.31:
Ignite-UX C.7.8.201 HP-UX System Installation Services
Ignite-UX C.7.11.444 HP-UX System Installation Services


sback900:/> bootsys -a client:10.2.3.24

The target system "client", is not allowing root remsh access by
you (root@sback900). Would you like bootsys to set the
root .rhosts file on that system at this time? ([y]/n) y
Password (10.2.3.24:root):
Will retry remsh now.
Cannot access server file: "/opt/ignite/boot/Rel_B.11.31/IINSTALL".
sback900:/> bootsys -a client:10.2.3.24
Cannot access server file: "/opt/ignite/boot/Rel_B.11.31/IINSTALL".
--------------------------------------------------------------------------------------------------------
P.S. This thread has been moved from HP-UX> system administration to ignite-ux - Forum Moderator

[Matti_Kurkela]

Does the directory /opt/ignite/boot/Rel_B.11.31/ exist on the server?

Looks like you have filesets from two different Ignite versions on the client system. This may cause some errors. The Ignite Frequently Asked Questions document says you should not mix filesets from different Ignite versions.

Please run "swlist -l fileset Ignite-UX" on both client and server, and show the output.

On the server, your problem might be that while you have installed the Ignite-UX bundle for 11.23, you perhaps haven't installed the fileset that contains the boot files for 11.31: I think it was an optional fileset and you must explicitly choose to install it.

(In the swinstall menu interface, after selecting the installation source, drill down into the Ignite-UX bundle and check the descriptions of products/subproducts/filesets.)

MK

[Eli Daniel]

Hi Matti

Does the directory /opt/ignite/boot/Rel_B.11.31/ exist on the server?

yes, the directory exist in tne server (client)

Anex the show swlist

SAPL910_rx6600 in /:/> swlist -l fileset Ignite-UX
# Initializing...
# Contacting target "hp9000"...
#
# Target: hp9000:/
#

# Ignite-UX C.7.8.201 HP-UX System Installation Services
Ignite-UX.BOOT-COMMON-IA C.7.8.201 Common Boot Components for IPF clients
Ignite-UX.BOOT-COMMON-PA C.7.8.201 Common Boot Components for PA-RISC clients
Ignite-UX.BOOT-KRN-11-11 C.7.8.201 Installation Boot Kernel for B.11.11 clients
Ignite-UX.BOOT-KRN-11-23 C.7.8.201 Installation Boot Kernel for B.11.23 clients
Ignite-UX.BOOT-SERVICES C.7.8.201 Network Boot Services for System Installations
Ignite-UX.CD-TOOLS C.7.8.201 Tools for creating CD media
Ignite-UX.CD-TOOLS-DOC C.7.8.201 Documentation for CD-TOOLS
Ignite-UX.CD-TOOLS-SRC C.7.8.201 Source for CD-TOOLS
Ignite-UX.DVD-TOOLS C.7.8.201 Tools for creating DVD media
Ignite-UX.DVD-TOOLS-DOC C.7.8.201 Documentation for DVD-TOOLS
Ignite-UX.DVD-TOOLS-SRC C.7.8.201 Source for DVD-TOOLS
Ignite-UX.FILE-SRV-11-11 C.7.8.201 File Archives Used By Clients During HP-UX Install
Ignite-UX.FILE-SRV-11-23 C.7.8.201 File Archives Used By Clients During HP-UX Install
Ignite-UX.IGNITE C.7.8.201 Graphical Ignite User Interface for Installations
Ignite-UX.IGNT-ENG-A-MAN C.7.8.201 Ignite-UX Manual Pages
Ignite-UX.IGNT-JPN-E-MAN C.7.8.201 Ignite-UX Japanese EUC Manual Pages
Ignite-UX.IGNT-JPN-S-MAN C.7.8.201 Ignite-UX Japanese SJIS Manual Pages
Ignite-UX.RECOVERY C.7.8.201 System disaster recovery tools
# Ignite-UX C.7.11.444 HP-UX System Installation Services
Ignite-UX.MGMT-TOOLS C.7.11.444 Tools for Managing Data Files on an Ignition Server
***Server Client***

[Jim Walls]

The swlist shows that only the Ignite_UX 11.11 and 11.23 BOOT components are installed. You need to also install the 11.31 components.

[Eli Daniel]

where can download depot?

I have this depot: "Ignite-UX-11-23_C.7.8.201_HP-UX_B.11.00_32_64.depot"

[Modris Bremze]

You have 2 ignite versions installed (C.7.8.201 and C.7.11.444) on the client? If possible, try removing all versions and then installing one, the same or lower as the one on the server.

[Eli Daniel]

Hi,
i have the problem remove install software version.

â â * Summary of Analysis Phase: â â
â â ERROR: Exclude Ignite-UX.MGMT-TOOLS,l=/,r=C.7.11.444 â â
â â ERROR: 1 of 1 filesets had Errors. â â
â â ERROR: The Analysis Phase had errors. See the above output for â â
â â details.

the error show to SAM

[Eli Daniel]

Hi Modris

how delet two version Ignite Client?

I can used swremove or via sam?

[Modris Bremze]

Whichever you prefer or feel more comfortable with. The background operations are pretty much the same.

[Eli Daniel]

Hi Modris

the run installing new client:

warning: permanently added sapl918,10.0.129.34 (RSA) to the list of know hosts.warning: untrusted X11 forwarding setup failed: xauth key data not generatedwarning: No xauth data; using fake authentication data for X11 Forwarding.ERROR: Failed to copy config.sys form /opt/ignite/boot/Rel_B.11.31/INSTALLFS on "sback900" you must use the -R release option to specify a release that is supported by sback900. sback900 list the contents of /opt/ignite/boot to determine the supported releasess.

[Eli Daniel]

The Ignite Server 11.23 and Server client 11.31.

Ignite Server:
HP-UX 11.23
# Initializing...
# Contacting target "sback900"...
#
# Target: sback900:/
#

# Ignite-UX C.7.8.201 HP-UX System Installation Services
Ignite-UX.BOOT-COMMON-IA C.7.8.201 Common Boot Components for IPF clients
Ignite-UX.BOOT-COMMON-PA C.7.8.201 Common Boot Components for PA-RISC clients
Ignite-UX.BOOT-KRN-11-23 C.7.8.201 Installation Boot Kernel for B.11.23 clients
Ignite-UX.BOOT-SERVICES C.7.8.201 Network Boot Services for System Installations
Ignite-UX.CD-TOOLS C.7.8.201 Tools for creating CD media
Ignite-UX.CD-TOOLS-DOC C.7.8.201 Documentation for CD-TOOLS
Ignite-UX.CD-TOOLS-SRC C.7.8.201 Source for CD-TOOLS
Ignite-UX.DVD-TOOLS C.7.8.201 Tools for creating DVD media
Ignite-UX.DVD-TOOLS-DOC C.7.8.201 Documentation for DVD-TOOLS
Ignite-UX.DVD-TOOLS-SRC C.7.8.201 Source for DVD-TOOLS
Ignite-UX.FILE-SRV-11-23 C.7.8.201 File Archives Used By Clients During HP-UX Install
Ignite-UX.IGNITE C.7.8.201 Graphical Ignite User Interface for Installations
Ignite-UX.IGNT-ENG-A-MAN C.7.8.201 Ignite-UX Manual Pages
Ignite-UX.IGNT-JPN-E-MAN C.7.8.201 Ignite-UX Japanese EUC Manual Pages
Ignite-UX.IGNT-JPN-S-MAN C.7.8.201 Ignite-UX Japanese SJIS Manual Pages
Ignite-UX.MGMT-TOOLS C.7.8.201 Tools for Managing Data Files on an Ignition Server
Ignite-UX.RECOVERY C.7.8.201 System disaster recovery tools

server where you want to install ignite
HP-UX 11.31

# Initializing...
# Contacting target "SAPL918"...
#
# Target: SAPL918:/
#

# Ignite-UX C.7.8.201 HP-UX System Installation Services
Ignite-UX.CD-TOOLS C.7.8.201 Tools for creating CD media
Ignite-UX.CD-TOOLS-DOC C.7.8.201 Documentation for CD-TOOLS
Ignite-UX.CD-TOOLS-SRC C.7.8.201 Source for CD-TOOLS
Ignite-UX.DVD-TOOLS C.7.8.201 Tools for creating DVD media
Ignite-UX.DVD-TOOLS-DOC C.7.8.201 Documentation for DVD-TOOLS
Ignite-UX.DVD-TOOLS-SRC C.7.8.201 Source for DVD-TOOLS
Ignite-UX.MGMT-TOOLS C.7.8.201 Tools for Managing Data Files on an Ignition Server
Ignite-UX.RECOVERY C.7.8.201 System disaster recovery tools

[Eli Daniel]

Thanks