HPE Community
Operating System - HP-UX
1846590 Members
2564 Online
110256 Solutions
New Discussion

problem setting term type on console

 
SOLVED
Go to solution
Mark Greene_1
Honored Contributor

‎03-29-2004 03:02 AM

‎03-29-2004 03:02 AM

problem setting term type on console

I have an 11i system with an HP ascii console set to vt100 emulation mode. When I login using any valid ID, the TERM variable gets set to "160". This is true whether I use ttytype -s -a or tset -s -Q in the /etc/profile. This appers to only be a problem on the console, as I can connect using Windows' telnet command or using exceed's xterm and telnet processes.

Has anyone seen this before? I even explicitly set the console's answerback string to vt100 in the setup, but that didn't make a difference.

TIA
mark
the future will be a lot like now, only later
0 Kudos
Reply
1 REPLY 1
Juan Manuel Naranjo A.
Frequent Advisor

‎03-29-2004 03:09 AM

‎03-29-2004 03:09 AM

Solution

Re: problem setting term type on console

check you /etc/ttytpe file
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.