problems in adaptader

[Jairo Campana]

Hi , I need to diable the fiber card, how I can do it . The card this offline and not have LINK

#dmesg
Mar 20 17:26:54 ecommerce1 last message repeated 20 times
Mar 20 17:27:03 ecommerce1 unix: fca-pci0: Link Failure. Resetting...
Mar 20 17:33:38 ecommerce1 last message repeated 68 times
Mar 20 17:33:48 ecommerce1 unix: fca-pci0: Link Failure. Resetting

thanks,

[Jeff Schussele]

Hi jairo,

First you need to determine the lanX instance - do

ioscan -fnC lan

Let's say it's lan3 - then run

ifconfig lan3 down

That will effectively turn it off, but it *could* be restarted with up
So, now remove or comment any entries for lan3 in the /etc/rc.config.d/netcon file.

Finally remove it's IP with

ifconfig lan3 unplumb

HTH,
Jeff

[Jairo Campana]

if fiber channel no have address hardware is whit port AUI :
I cannot do umplunb like one card network
btlan3: reset state is 550 at 0/4/0/0/6/0....
btlan3: WARNING: AUI Loopback Failed at 0/4/0/0/6/0....
btlan3: Reset looper timeout: DMA timeout occurred at 0/4/0/0/7/0
btlan3: reset state is 550 at 0/4/0/0/7/0....
btlan3: WARNING: AUI Loopback Failed at 0/4/0/0/7/0....

[Eugeny Brychkov]

DMA!? This message should not concern with link problems. Are you sure card is seated in proper slot? Are you sure it's seated properly/securely? Is it HP-certified card (having HP part/product number)?
Eugeny