Problems installing x25 card model J3525A

[likid0]

Hy,

I am triying to install J3525A x25 card in a HP9000 N4000 with hp-ux 11i, the problem i have is that the card is not claimed buy the system i get:

unknown -1 172/0/0 UNCLAIMED unknown PCI(1133B921)'


My doubt is that i didnt get any drivers cd, but from what i have seen i think i need to purchase the HP X.25/9000 J2793B software to make it work?, is this true?, is it necesary to have this soft?


thnx

[Peter Godron · Accepted solution]

Daniel,
from http://docs.hp.com/en/J2793-90059/index.html

Did you follow:
http://docs.hp.com/en/J2793-90059/ch04s05.html?jumpid=reg_R1002_USEN

Something else to be aware of:
http://docs.hp.com/en/J2793-90062/ch01s03.html?jumpid=reg_R1002_USEN

I believe you will need the software. What you need is the J3525 driver for HPUX.

[likid0]

I have searched for drivers with J3525, but cant find anything, the only reference to software i have found, is in the 1st manual you pointed out, that is the one i was reading, it says install the J2793B software.

[Peter Godron]

Daniel,
after further investigation there does not seem to be a seperate driver for J3525, so my conclusion is also that you need the software pack.

Can you please update/complete this thread with your findings.