Raw device limit

[Troyan Krastev]

Hi all,

SYBASE DBA want me to create for him 36GB raw data device.
Document Id: UNX1010154 says that applications in HP-UX 10.10 that access device
s directly are limited to 4GB.
Is the same limit apply to applications in HP-UX 10.20 and HP-UX 11.00?
Where does this limit come from? I can create Logical Volume >100G - isn't it ra
w data device?

Thanks
Troy.

[Rita C Workman]

Check this thread..

http://forums.itrc.hp.com/cm/QuestionAnswer/1,1150,0x66c3854994d9d4118fef0090279cd0f9,00.html

[Troyan Krastev]

Hi Rita,

Thanks for the information! One more question:
Is that mean that the Application ( SYBASE)
will be able to use 128GB raw partition on HP-UX 10.20?

[Philip Chan_1]

Hi Troyan,

For HPUX 10.20 or later, the per disk device limit of Sybase 11.9.x is 32GB. So, for the 128GB of storage that are giving to your dba, he could made FOUR Sybase disks out of it. In Sybase, having more than one disk devices is good practice because the data and log devices got to be separate for performance optimization.

Rgds,
Philip

[Troyan Krastev]

Hi Philip,

I'm going to give you max points,
bat can you point me some documentation about
the problem.

Thanks
Troyan

[Philip Chan_1 · Accepted solution]

Follow the link below,

http://manuals.sybase.com/onlinebooks/group-as/asp1192e/aseinhp

Look under Ch.2 Installation Requirements -> Adaptive Server Specification, through there you see almost all Sybase limits.

Hope this help.

Rgds,
Philip