refer to jetadmin

[defhoon]

In jetadmin, adding a printer to local spooler, if there is no HP model in HP-UX10.xx system, how can i add a printer to spooler.
there is no unix driver of Hp 1050c plotter....

[Thierry Poels_1]

hi,
try one of the available models:
dumb plotter (might work for any non-HP plotter)
another HP plotter

good luck,
Thierry.

[Animesh Chakraborty]

hi,
You can choose either of these two and try:-

52) To Select dumbplot model script for plotter
57) HP Plotter not given in this list

Best of luck
Animesh

[Sanjay_6]

hi,

in jetadmin when you define the ip for the plotter the system should automatically query and pich up a compatible driver.

Give it a try.

Thanks

[Ravi_8]

Hi,
all hp printer models will be in jetadmin, and the drivers too. don't assume things....

later
ravi

[Stefan Schulz]

We have JetAdmin 6.21 installed and had no problems adding a HP 1050C to the spooler.

I haven't been asked to choose a driver. So there is support for the HP1050C.

Which version of JetAdmin are you using? If its not 6.21 or higher try to upgrade.

If you don't want to upgrade, you should be able to use the HP750C driver for this model.

Hope this helps.

Regards Stefan