Reinstall a lan driver

[HDgio]

Hi
I have clone a RP4440 from another system with ignite, but the lan name is not sequential
Hardware Station Crd Hdw Net-Interface NM MAC HP-DLPI DLPI
Path Address In# State NamePPA ID Type Support Mjr#
0/1/2/0 0x00156004A13E 0 UP lan0 snap0 1 ETHER Yes 119
0/1/2/1 0x00156004A13F 2 UP lan2 snap2 2 ETHER Yes 119
0/2/1/0/4/0 0x001279435270 1 UP lan1 snap1 3 ETHER Yes 19
0/2/1/0/4/1 0x001279435271 4 UP lan4 snap4 4 ETHER Yes 19
0/2/1/0/6/0 0x001279435272 3 UP lan3 snap3 5 ETHER Yes 19
0/2/1/0/6/1 0x001279435273 5 UP lan5 snap5 6 ETHER Yes 19
0/6/1/0/4/0 0x0012794351A4 6 UP lan6 snap6 7 ETHER Yes 19
0/6/1/0/4/1 0x0012794351A5 7 UP lan7 snap7 8 ETHER Yes 19
0/6/1/0/6/0 0x0012794351A6 8 UP lan8 snap8 9 ETHER Yes 19
0/6/1/0/6/1 0x0012794351A7 9 UP lan9 snap9 10 ETHER Yes 19

How I can change the lan 2 with 1 and 4 with 3 ?
Thanks to all

[Steven E. Protter]

Shalom,

How those numbers get assigned is something of a mystery. Changing them after installation is generally troublesome.

It can be done but is rarely worth the trouble.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1027043

SEP

[HDgio]

think is better don't touch nothing
Thank
HD

[Fabio Ettore · Accepted solution]

Ciao,

if I understand fine you need to change the lan instance number and not to reinstall the entire lan driver.
I changed lan instance number successfully in the past with the procedure in the following document:

UTRANKBRC00017098 - How To Change lan Instance numbers in HPUX

I hope you can access to ITRC knowledge base. You need the ioconfig_dump tool.

Best regards,
Fabio

[HDgio]

It's OK thanks

[HDgio]

Bye