HPE Community
Operating System - HP-UX
1834578 Members
3325 Online
110069 Solutions
New Discussion

Re: SCSI disks access errors counters resetting

 
Guennoc
New Member

‎03-10-2006 03:59 AM

‎03-10-2006 03:59 AM

SCSI disks access errors counters resetting


Hello,

Is it possible to reset the following counters (see the example below):

-- Information Tool Log for SCSI Disk on path 10/4/4.15.0 --
Read Errors:0, Write Errors:1, Non-Medium Errors:0

-- Information Tool Log for SCSI Disk on path 10/8.1.0 --
Read Errors:0, Write Errors:2, Non-Medium Errors:0

Could you tell me a method?

Thanks
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎03-10-2006 06:42 AM

‎03-10-2006 06:42 AM

Re: SCSI disks access errors counters resetting

This operation is only possible in expert mode, which is password protected.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Guennoc
New Member

‎03-21-2006 09:39 PM

‎03-21-2006 09:39 PM

Re: SCSI disks access errors counters resetting

Could you detail me a method?

Regards
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.