SDLT6000

[harmt01]

Plugged my SDLT into my fiber switch port 1.
Plugged my HBA into my fiber switch port 2.
Zoned the switch for port 1 & 2
Activated.........

Now the question:

What do I have to do in HP-UX to see my other SDLT?
I do not see it in "ioscan -fn"
Do I have to assign it a device file?

Thanks,

[harmt01]

This is ioscan before new system added.
I see no difference after connecting.

:/root >> ioscan -fnC tape
Class I H/W Path Driver S/W State H/W Type Description
==========================================================================
tape 0 0/3/1/0/4/1.8.0.255.6.14.1 stape CLAIMED DEVICE HP SDLT600
/dev/rmt/0m /dev/rmt/c9t14d1BEST
/dev/rmt/0mb /dev/rmt/c9t14d1BESTb
/dev/rmt/0mn /dev/rmt/c9t14d1BESTn
/dev/rmt/0mnb /dev/rmt/c9t14d1BESTnb
tape 1 0/3/1/0/4/1.8.0.255.6.14.2 stape CLAIMED DEVICE HP SDLT600
/dev/rmt/1m /dev/rmt/c9t14d2BEST
/dev/rmt/1mb /dev/rmt/c9t14d2BESTb
/dev/rmt/1mn /dev/rmt/c9t14d2BESTn
/dev/rmt/1mnb /dev/rmt/c9t14d2BESTnb

[harmt01]

.