Operating System - HP-UX
1834094 Members
2069 Online
110063 Solutions
New Discussion

second network archive not working.

 
Sachin Patel
Honored Contributor

second network archive not working.

Hi
I have install ignite server on one of my hp system and created few network recover archive. Now I am trying to create network recovery archive again for same system (to make sure archive is latest) it fails.

It asked me bunch of question at the end ask me
"do you want to create a network system archive for system sys1 now?" when I press yes
I got following window.

"Swinstall(1M) faild to install recoveery tools from:
fosters:/var/opt/ignite/depots/recovery_cmds
Warning: Failed creating symlink from clients lanic id to clients hostname
file exists (errorno = 17)
Warning: could not open client status file
/var/opt/ignite/revovery/client_mnt/0x0060B0B204AF/recovery/client_status: permission denied (errorno = 13).

----- and some more permission problems.

/var/opt/ignite is full open
drwxrwxrwx 11 bin bin 1024 Mar 24 10:00 ignite

What is wrong here?

Sachin



Is photography a hobby or another way to spend $
5 REPLIES 5
Massimo Bianchi
Honored Contributor

Re: second network archive not working.

Possible patch that applies:

Ignite-UX make_medialif patch PHSS_27407

and also, i would check the permissions of
/var/opt/ignite/recovery
/var/opt/ignite/revovery/client_mnt
/var/opt/ignite/revovery/client_mnt/0x0060B0B204AF
/var/opt/ignite/revovery/client_mnt/0x0060B0B204AF/recovery
/var/opt/ignite/revovery/client_mnt/0x0060B0B204AF/recovery/client_status

Massimo
Steven E. Protter
Exalted Contributor

Re: second network archive not working.

Try removing the client on the server and then adding it back in.

If it refused to add, you may need to boot the client off the server and pull the latest version of Ignite to it.

If the client is important back it up to tape with make_tape_recovery prior to following this advice.

At the client:
Boot from console

Interupt at the 10 second prompt

bo lan.ip_of_ignite_server install

See what happens.

Watch the /var/adm/syslog/syslog.log file on the server. You will get helpful information as to why it fails, if it does.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Sachin Patel
Honored Contributor

Re: second network archive not working.

I can't reboot the client. I will try to delete its image from ignite server. I have just reinstall the server but I will check about patch. although it lets me create another clients image only this particular client has problem.

Sachin
Is photography a hobby or another way to spend $
Sachin Patel
Honored Contributor

Re: second network archive not working.

I remove the client and I remove all the ignite package from client as well.

now when I try to create new network archive I gets following message.

"
nfs mount: bindresvport: t_errno = 23
nfs mount: get_fh: Couldn't bind to a reserverd port. return = -1
nfs mount: retry: backgrounding: /var/opt/ignite/client.mnt
ERROR: Failed to mount "fosters:/var/opt/ignite/clients"
nfs mount: retry: retrying(1) for /var/opt/ignite/client.mnt after 5 seconds


Sachin
Is photography a hobby or another way to spend $
Sachin Patel
Honored Contributor

Re: second network archive not working.

Nothing was working so I finally remove ignite from server and install it again. It is working now.

Sachin
Is photography a hobby or another way to spend $