SecurePath v3.e for HPUX11i

[Support rti]

dear all,
We have servers rp3440 running hp-ux 11.11 with eva3000 , I have secure path 3.0e for HPUX.
I tried swinstall to install secure path, this message Error generated and the secure not installed :
See file attached

please can any one help me ,

Said
said_hammoud@rtialgerie.com

[Dave Hutton]

Theres a known issue, I think it has to do with a specific patch but the Dec 04 patch bundle has in it. So if you have that bundle you'll have issues. It's been posted before here a few times, but heres the solution:
Theres a known problem with SP3.0E if you have a certain patch on your server. I had opened a ticket with HP and they had given me a document on how to get around it, which I can't find. But I was able to find an old post that I remember replying to that had the correct info:

The Secure Path depot can be repackaged and a new depot created
that can be read by SW-DIST. This is done by executing the following
steps as root:

# mkdir /tmp/products
# mkdir /tmp/CPQ

Untar the appropriate bad 3.0e Secure Path depot (located
in /tmp/SecurePath) to /tmp/CPQ:

# cd /tmp/CPQ
# tar -xvf /tmp/SecurePath/CPQswsp.11_11_64.3.0E.00F.00F.depot
# cd catalog
# touch swlock

Create a new depot packaged correctly, using the depot you untarred:
# swpackage -x media_type=tape -s /tmp/CPQ
@ /tmp/products/CPQ_11_11_64_3.depot

The depot, /tmp/products/CPQ_11_11_64_3.depot, can be read
successfully by SW-DIST in the 11.11 Dec 2004 OEUR and the PHCO_32116
patch.

[Steven E. Protter]

Shalom Said,

/var/adm/sw/swinstall.log

Post the output and/or look for the confirmation that the problem is indeed the one above.

secure path seems to be causing a lot of problems right now. Take the time to be certain that you have your system patched exactly as it recommends to avoid trouble.

SEP