serial communications

[deep_2]

Hello,
How can I dial into a HP-UX 10.20 WS for remote dialup access without SLIP,PPP?

Thanks.

vja

[A. Clay Stephenson]

You do it the really old fashioned way. You hand a modem off a serial port. You make an entry in /etc/initab to spawn a getty process. You then dialup via a terminal emulator program and you see 'Login'. The good news is that the modem setup can be done under SAM->Peripheral Devices->Terminals and Modems.

[U.SivaKumar_2]

hi,

Without SLIP or PPP you will not able use any
IP services using this dialup setup. Using
getty will give you only terminal access .
You can use UUCP program for basic services like File transfer and Mail transfer.

regards,
U.SivaKumar

[deep_2]

Using Kermit, I am unable to receive a login prompt on my Windows hyperterminal. The connection comes up with some junk on the Kermit screen and then drops the carrier.

[Paula J Frazer-Campbell]

Hi

Check you emulation setting on hyper term,

wyse60 or vt100 should work.

Paula