statdaemon

[Cem Tugrul]

Hello Forum,

i have daemon named "statdaemon"...first of all
i could not able to find any doc or man page
about it...On my production srv i have checked
this proc PID=3 via Glance and shows me about
CPU(usage)&System CPU value arrounds 3.8-4.0
is it normal?Could it be the reason may needs
any patch?
i have checked my other servers N-class &rp5430
with glance about statdaemon and CPu(usage)&system CPU=0.0

Ok..i do not have any problem about my production server but i just try to find out
why this daemon eats CPU even though low % ?

Thank's...

[Florian Heigl (new acc)]

statdaemon should be the thing that is started from inetd.

look for 'rstatd' or 'rpc.statd' in /etc/inetd.conf.

unfortunately I'm not quite sure on this, but of course the cpu consumption is too high.

look at the statdaemon man page :)

[morganelan]

statdaemon is one of the principal thread scheduling routines.This routine do as a general-purpose kernel process run once per second to check and update process and virtual memory artifacts, such as signal queueing and free protection IDs. Calls schedcpu() routine to recompute thread priorities and statistics.

[Zigor Buruaga]

Hi,

See this link:
http://docs.hp.com/en/5965-4642/ch01s15.html

it's part of the "HP-UX Process Management: White Paper"

Regards,
Zigor

[Florian Heigl (new acc)]

morganelan,

thanks! seems I was completely on the wrong track...

:)

[Cem Tugrul]

Thank's Guys..
need more explanations...

Points are still waiting for submitting
:-))

[Arunvijai_4]

Got some information in HP-DSPP. Synchronization and locking on HP-UX,
http://h21007.www2.hp.com/dspp/tech/tech_TechDocumentDetailPage_IDX/1,1701,2540,00.html

http://docs.hp.com/en/B2355-60105/statd.1M.html

-Arun

[Cem Tugrul]

Really interesting!!!!
statdaemon still eats my CPU %4.0/3.9
and i am still can not able to find out WHY???
Any other suggestions....

[Muthukumar_5]

Check this:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=58316

hth.

[Arunvijai_4]

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=891789

No need to worry abt statdaemon.

-Arun

[VEL_1]

Hi,

See the following hp docs link:

http://docs.hp.com/en/5965-4642/ch01s15.html

[Cem Tugrul]

i do not know why but after rebooting
daemon behaves normal