HPE Community
Operating System - HP-UX
1833313 Members
3121 Online
110051 Solutions
New Discussion

SYSCMDS

 
SOLVED
Go to solution
Norman_21
Honored Contributor

‎01-30-2003 02:28 AM

‎01-30-2003 02:28 AM

SYSCMDS

HI guys,

First time when I installed the ignite, the /opt file system was full and I had to remove the SYSCMDS to have some space as being advised by someone. However, here I'm again trying to creat a nother recovery tape but it fails because it can not find that file. Any advice will be appreciated.
Thanks.
"Attitudes are contagious, is yours worth catching"/ My first point was given by SEP on January 31, 2003
0 Kudos
3 REPLIES 3
Dietmar Konermann
Honored Contributor

‎01-30-2003 02:34 AM

‎01-30-2003 02:34 AM

Solution

Re: SYSCMDS

The SYSCMDS is a required component. Restore it or re-install Ignite.
"Logic is the beginning of wisdom; not the end." -- Spock (Star Trek VI: The Undiscovered Country)
0 Kudos
Ian Dennison_1
Honored Contributor

‎01-30-2003 02:46 AM

‎01-30-2003 02:46 AM

Re: SYSCMDS

If you have a good tape backup of the /opt mount point(not Ignite, more like fbackup or omniback), now would be a good time to load it.

If you run out of space on /opt, create a new lvol for one of the larger areas and copy the data across.

This is not impossible to repair.

Share and Enjoy! Ian
Building a dumber user
0 Kudos
Norman_21
Honored Contributor

‎02-24-2005 04:27 AM

‎02-24-2005 04:27 AM

Re: SYSCMDS

Removing the SYSCMDS was a bad idea. I had to reinstall the IGNITE-UX utility.
"Attitudes are contagious, is yours worth catching"/ My first point was given by SEP on January 31, 2003
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.