syslog

[sunny..]

C8000Workstation, 11i v1

1st
===============================================
Oct 9 11:00:15 ws01 sysloged: restart
Oct 9 18:38:52 ws01 vmunix: 0/3/1/0.1.2.3 hid
Oct 9 18:39:50 ws01 vmunix: ERROR usb_enum_dev: Could not get max packet length. Status 0x5
Oct 9 18:39:50 ws01 vmunix: ERROR usb_probe: Device enumeration failed.
Oct 9 18:41:33 ws01 vmunix: ERROR usb_config_dev: Could not get config info. Status 0x5
Oct 9 18:41:33 ws01 vmunix: ERROR usb_enum_dev_end: Could not configure the device.
Oct 9 18:41:32 ws01 su: + tty??
Oct 9 18:41:34 ws01 vmunix: 0/3/1/0.1.2.3 hid
Oct 9 18:41:33 ws01 vmunix: ERROR usb_probe: Device enumeration failed.
Oct 9 18:58:02 ws01 above message repeats 4 times
Oct 9 21:49:42 ws01 vmunix: 0/3/1/0.1.2.3 hid


already installed : patch PHKL_35011

2nd
=========================================

Oct 20 11:00:16 ws13 sysloged: restart
Oct 21 00:59:14 ws13 vmunix: hub probe: resetting dev on port 1
Oct 21 01:00:50 ws13 su: + ta
=========================================

I'm so curious.....
Thanks. in korea

[Shibin_2]

Above errors looks like a month old one.

Are you still really getting alerts from USB port?

[sunny..]

Yes, the log is being continued right up until the present day.

[Shibin_2]

Have you gone through this thread?

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1012014

I hope this helps.