System error

[Sakui]

I have A SAN network with two N -Class servers running a oracle cluster application. I am suspect a disk failure with a couple of issues affecting the FTP service.



Jan 25 05:07:28 ux_db02 ftpd[22624]: FTP session closed
Jan 25 05:10:10 ux_db02 ftpd[22946]: FTP session closed
Jan 25 05:12:54 ux_db02 ftpd[23267]: FTP session closed
Jan 25 05:40:35 ux_db02 syslog: CVSDM; MAJOR WARNING Event Code=204; Description
=One or more disks have failed.; Hardware Address=1/4/0/0.1.17.39.0.0.0; Unknown
FRU Location; Unknown Vendor ID; Unknown Model ID; Unknown Product S/N; Latest
information on this event at http://docs.hp.com/hpux/content/hardware/ems/Remote
Monitor.htm#204
Jan 25 05:40:35 ux_db02 EMS [2668]: ------ EMS Event Notification ------ Value
: "MAJORWARNING (3)" for Resource: "/StorageAreaNetwork/events/SAN_Monitor/DiskA
rray" (Threshold: >= " 3") Execute the following command to obtain event
details: /opt/resmon/bin/resdata -R 174850049 -r /StorageAreaNetwork/events/S
AN_Monitor/DiskArray -n 174850055 -a
Jan 25 06:47:51 ux_db02 syslog: CVSDM; MAJOR WARNING Event Code=204; Description
=One or more disks have failed.; Hardware Address=1/4/0/0.1.17.39.0.0.0; Unknown
FRU Location; Unknown Vendor ID; Unknown Model ID; Unknown Product S/N; Latest
information on this event at http://docs.hp.com/hpux/content/hardware/ems/Remote
Monitor.htm#204
Jan 25 06:47:52 ux_db02 EMS [2668]: ------ EMS Event Notification ------ Value
: "MAJORWARNING (3)" for Resource: "/StorageAreaNetwork/events/SAN_Monitor/DiskA
rray" (Threshold: >= " 3") Execute the following command to obtain event
AN_Monitor/DiskArray -n 174850056 -a

[TTr]

Did you execute the command as it is stated in the error?

/opt/resmon/bin/resdata -R 174850049 -r /StorageAreaNetwork/events/S
AN_Monitor/DiskArray -n 174850055 -a

You have CVSDM running. Run the array client and check your array for disk failures. Depending on what array you have the command is under /opt/sanmgr/commandview/client/sbin

Also, look at your array and see if there are any fault/service lights and disks that have fault lights on.

[Sakui]

Which of the command should i try to query the array. What do also say concerning the FTP session close.

[Mridul Shrivastava]

Alternatively you could check ioscan -fn o/p to see if there is any NO_HW entries??

[Mridul Shrivastava]

Have a look at the following thread:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=219966

Also confirm that your macro is not connecting/disconnecting multiple times.

whats the ftp version on the server? Try installing a different version which is working fine on other servers if the above recommendations doesn't help.

[TTr]

Try the armdsp command. It depends on what array you have.

The FTP messages are normal. You may want to reduce the loging level for ftpd in /etc/inetd.conf