HPE Community
Operating System - HP-UX
1830503 Members
2552 Online
110006 Solutions
New Discussion

Telnet problem

 
Samiuddin
New Member

‎06-02-2008 04:59 AM

‎06-02-2008 04:59 AM

Telnet problem

Hi,

When i try to telnet my server from windows workstation i am getting a screen with message:

***************************************
OC://WebConnect SNA Access server.....
TS> ! vt100,5250

Could anyone help me to get telnet from any workstation type.

Thanks,
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎06-02-2008 05:04 AM

‎06-02-2008 05:04 AM

Re: Telnet problem

Have a look at

http://forums12.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1212411806618+28353475&threadId=1235751

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
TTr
Honored Contributor

‎06-02-2008 05:31 AM

‎06-02-2008 05:31 AM

Re: Telnet problem

If you are indeed connecting to an HP-UX server then the standard HP-UX telnet service on your UNIX server has been replaced by the OpenConnect Webconnect access server.

http://www.openconnect.com/legacymodernization/wc.jsp

Most likely you can no longer use standard telnet.

The way these web based products work is the provide you with a web server and you connect to it via a standard web server in https (secure) mode. Then once on the web page you can run a telnet applet that gives you telnet access to the HP-UX server.

This telnet access is encapsulated within the https connection.

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.