HPE Community
Operating System - HP-UX
1850535 Members
2842 Online
104054 Solutions
New Discussion

Two X.25 cards

 
Mohd Oryza Ananda
Occasional Contributor

‎11-08-2000 10:12 AM

‎11-08-2000 10:12 AM

Two X.25 cards

I would like to have a second X.25 cards installed in HP for redundancy. These two cards are then connected to two Cisco Routers and to WAN.

Purpose of this configuration is to reduce downtime when one of the cards fails. How to configure the cards so both are active in CONS configuration.

rgds
oJa
0 Kudos
Reply
1 REPLY 1
Harish Kumar Sudhamalal
Advisor

‎11-15-2000 11:17 AM

‎11-15-2000 11:17 AM

Re: Two X.25 cards

Hi

You will have to configure both the X.25 Cards and give them addresses etc.

Apart from this for the redundancy to work, you should configure the router to take up the alternate like automatically.

- Harish Kumar
Winners Never Give Up
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.