UPS and database

[Valkiria Santos]

I would like add an script to shutdown my database before system going down. My UPS connected at a K-class. I don?t have UPS Manager II, I know with this software this procedure is possible, but I don?t know if k-class with old ups is possible.

Waiting for your helps.
tks,
Valkiria

[Shannon Petry]

A K-Class and a C-Class both have the same UNIX, HP-UX. Therefor, as long as the UPS Monitor software runs on your OS (10.20/11.0/11i) it makes no difference between a K or D or B class machine!

The problem you may have is finding the software for the UPS on HP-UX XX.X? Most older software allowed a single command to be executed at power failure. I would recommend you create a script which shuts down the DB, and performs a proper shutdown, and call that from your UPS Manager!

Regards,
Shannon

[Shumi Begum]

you can create a script to the init processes, so when system goes down it automatically shutdown your listener and the database.

[Valkiria Santos]

The operational system is 10.20 on K-class, I just would know if is possible intall UPS Manager II revision 3.10 on this system...

Tanks.

[CHRIS_ANORUO]

It is very possible. Connect all the terminal/monitor cables to the server and install the software, then configure the port through SAM

[Vincenzo Restuccia]

Yes,see http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/B2355-90053/B2355-90053_top.html&con=/hpux/onlinedocs/B2355-90053/00/00/55-con.html&toc=/hpux/onlinedocs/B2355-90053/00/00/55-toc.html&searchterms=UPS%7cManager%7cII%7crevision%7c3.10&queryid=20010426-083622

[Abel Berger]

This reply its a test, because yesterday I do it, but my questios for Valkiria had not been brought update.
Sorry. See you another day !