HPE Community
Operating System - HP-UX
1827286 Members
1692 Online
109717 Solutions
New Discussion

vpar boot problem

 
Randy Rayfield
Advisor

‎08-23-2004 02:02 AM

‎08-23-2004 02:02 AM

vpar boot problem

I have a N4000 with vPars (2 of them) and have a problem. The second vPar boot disk is on our XP, and a switch change (last week) changed the paths to the boot disk. How do I find the new path? It wont let me boot and break into it from the console (Ctrl-a) Tried a vparreset also. I can jump over via a Ctrl-a but it fails out. Any info?
0 Kudos
Reply
1 REPLY 1
gil paz_2
Advisor

‎08-23-2004 08:13 PM

‎08-23-2004 08:13 PM

Re: vpar boot problem

Hi Randy,
If you can boot the system and boot with out vPar.
boot to vmunix and run ioscan to find the new path for the disk that on the XP.
After that boot with vPar and change the boot path with vparmodify or from
/opt/vprmgr/bin/vprmgr
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.