what's wrong with our disk!

[leyearn]

/var/adm/syslog/syslog.log

Feb 28 10:15:10 NMC1_JL vmunix: blkno: 1719836, sectno: 3439672, offset.
Feb 28 10:15:10 NMC1_JL vmunix: LVM: PV 0 has been returned to vg[2].
Feb 28 10:17:10 NMC1_JL vmunix:
Feb 28 10:17:10 NMC1_JL vmunix: SCSI: Write error -- dev: b 31 0x0, errno: 126,,
Feb 28 10:17:10 NMC1_JL vmunix: blkno: 3383512, sectno: 6767024, offset.
Feb 28 10:17:10 NMC1_JL vmunix: LVM: PV 0 has been returned to vg[2].
Feb 28 10:19:10 NMC1_JL vmunix:
Feb 28 10:19:10 NMC1_JL vmunix: SCSI: Write error -- dev: b 31 0x0, errno: 126,,
Feb 28 10:19:10 NMC1_JL vmunix: blkno: 1723110, sectno: 3446220, offset.
Feb 28 10:19:10 NMC1_JL vmunix: LVM: PV 0 has been returned to vg[2].

[Mic V.]

The only time I've seen this is when a disk is going bad. If it were me, I'd be calling HP ASAP! :-)

Mic

[Bill Hassell]

You may have a disk hardware failure. The error number is 126 which may relate to disk array controller problems or a possible patch or LVM setup problem. There are a number of different conditions that lead to the 126 error so you'll need HP's help to find the real problem.

[Ravi_8]

Hi,

Seems to be disk is in problem, I would log call with HP