Operating System - Linux
1828255 Members
2776 Online
109975 Solutions
New Discussion

Re: A issue for Linux , Itanium.

 
SOLVED
Go to solution
Taohung
Frequent Advisor

A issue for Linux , Itanium.

Hello, everyone
I have two issues to install Redhat AS4 on the Integrity server.
1)Can I boot install-mode with Redhat AS4 CD 1 and exchange the source to NFS share ?

In the x86 or x86_64, I can type "linux askmethod" to exchange linux source.
Is this same to Integrity Server , too ?

2)How do I mirror linux boot disk with Itanium-2 soft-raid ?

Thank you.
3 REPLIES 3
Ivan Ferreira
Honored Contributor
Solution

Re: A issue for Linux , Itanium.

1) According to the installation guide, this should work also for Itanium based processors.

"For example, if the NFS site contains the directory /mirrors/redhat/arch/RedHat/, enter /mirrors/redhat/arch/ (where arch is replaced
with the architecture type of your system, such as i386, ia64, ppc, or s390)."


Note that ia64 is listed.


2) I did this. See my post in this thread:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=904635

The only thing missing that that when you configure the partitions, you must specify that is RAID.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
Taohung
Frequent Advisor

Re: A issue for Linux , Itanium.

I will try again.
Thank you.
Taohung
Frequent Advisor

Re: A issue for Linux , Itanium.

Thanks.