DL380 G5 Centos 5.3 network problem

[t0m4s]

i have installed centos 5.3 kernel 2.6.18-128.1.4.el5 on a DL380 G5 server
when the install its done i try to ping my gateway (192.168.0.1) but it says destination host unreachable
i run ethtool eth0 it's says
Supported oprts: [ TP ]
Supported link modes: 10baseT/Half 10BaseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full
Supports auto-negotiation: Yes
Advertised link Modes: 10baseT/Half 10BaseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full
Advertised auto-negotiation: Yes
Speed: Unknown! (65535)
Duplex: Unknown! (255)
Port Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: g
Wake-on: d
Link detected: no

i dont know why it says not link detected, i try it connecting to a dlink router (192.168.0.1) directly and its linking, i try with another DL380 G5 server installing the same OS and gives me the same problem

Can somebody help me
Thanks

Tomas

[t0m4s]

in the new kernel centos or RHEL change the interfaces
eth1 is the one above and eth0 is the one below

Anyways
Thanks

[Jimmy Vance]

Actually it's the way the 2.6 kernel enumerates the PCI bus

[Rudy Hadsell]

Did you get this issue resolved, i am having the same issue, but i do not understand how to fix it. thanks..

[t0m4s]

yes i did solve it
which server do you have?